THIS GENERAL FREELANCE SERVICE AGREEMENT ("the Agreement") is entered into between the Contractor and the Client for the applicable freelance form-filling project.

THE FIRST PART OF THIS AGREEMENT IS Vericom Technology, registered at Floor 7, B-Wing, Steel House Off Mahakali Caves Road Andheri (E near, Paper Box Rd, Mumbai, Maharashtra 400093.

THE SECOND PART OF THIS AGREEMENT IS {YOUR NAME}, who resides at {YOUR ADDRESS}.

Points to Be Noted

* YOUR AGREEMENT IS MADE FOR 11 MONTHS WITH Vericom Technology.

A) The Client thinks that the Contractor has the necessary qualifications, experience, and abilities to provide service to the Client.

B) The Contractor is agreeable to providing such service to the Client on the terms and conditions set out in this Agreement.

In consideration of the matters described above and of the mutual benefits and obligations outlined in this Agreement, the Client and the Contractor agree as follows:

1. Job Title and Description

1.1 The job duties the Client will be expected to perform consist of filling the forms as per the data provided by the online portal.

1.2 The Client will perform any duties as requested by the Contractor that are reasonable and that are customarily performed by a person held in a similar position in this business.

1.3 The Client agrees to abide by the Contractor's rules and regulations, including those concerning work schedules.

2. Client Remuneration

2.1 Remuneration: For the form-filling service rendered by the Client, the Client shall be entitled to payment at the rate of ₹60 (INR) per accepted form. For the assigned workload of 250 forms, the maximum project remuneration may be ₹15,000, subject to successful completion and the applicable Quality Control report. The Client shall raise the invoice/payment request after successful completion of the project. The Contractor will process the applicable project payment within 1 working day after the Quality Control report, subject to the Client satisfying the required accuracy and other terms of this Agreement.

2.2 Billing: The Contractor will provide a workload of 250 forms, which the Client shall complete within 3 days under the given criteria of this Agreement. This Agreement has been signed for one system. Payment is subject to the Quality Control report and the other applicable conditions contained in this Agreement.

2.3 Accuracy: The Contractor will provide feedback after completion of the Quality Check and shall issue a Quality Report. Both parties agree to assure the highest quality of end service. The required cutoff is 225 correct forms out of 250 forms, which is a minimum accuracy requirement of 90%. Accepted forms are payable at ₹60 per form. If the Client falls below the cutoff or the ID is terminated under the applicable project conditions, the ₹4,500 registration amount will apply as stated in this Agreement.

2.4 The Q.C. Department: The Q.C. Department will check the submitted forms using the server and the applicable quality-control procedure. If the Client makes any mistake, including but not limited to spelling, punctuation, extra or missing spaces, extra or missing lines, skipped entries, or other deviations from the supplied instructions, the affected form may be rejected. The Client must maintain the required cutoff of 225 correct forms out of 250, equivalent to 90% accuracy.

3. Conflict of Interest / Project Conditions

3.1 Application Fee(s): The registration/application amount is ₹4,500. The registration amount may be deducted from salary if salary is generated. If salary is not generated because the Client fails to complete the work or fails under the applicable project conditions, the Client shall be liable for the same registration amount in accordance with this Agreement. The applicable amount must be cleared within 1 working day after the Q.C. report. The Client must start and complete the form-filling work assigned by the Contractor on the project start date selected or communicated for the project. In case of failure to start the work, detection of incomplete forms, or incomplete submission of work as defined by the Contractor, the applicable registration/application amount and any properly issued NOC invoice shall be governed by this Agreement and applicable law.

3.2 TAT (Turn Around Time): The Second Party has 3 days, including holidays, to complete the assigned work of 250 forms. After submission, the First Party shall provide the accuracy/Q.C. report within 1–2 working days, subject to the technical specifications and accuracy parameters included in this Agreement.

3.3 Client Responsibility: The Client will execute the data-processing work provided by the Contractor in such a manner as to carry out the work efficiently and maintain a minimum accuracy of 90%.

3.4 Contractor Responsibility: The Contractor agrees to provide formats, data, instructions and other relevant information required for processing the assigned job. The Client agrees to process the supplied information according to the prescribed format and instructions.

3.5 Quality Responsibility: The Client is responsible for reviewing the submitted work and maintaining the minimum required accuracy of 90%, meaning at least 225 correct forms out of 250 forms.

3.6 Agreement Duration: This Agreement represents the business agreement and operational understanding between the parties and shall remain in effect for six months from the date of execution hereof. The Contractor's specifications in terms of quality and other parameters shall be issued by the Contractor. The general work agreement also states a validity period of 11 months. If the Client or Contractor wishes to end the business relationship, they must proceed according to the termination provisions of this Agreement.

4. Termination Employment

4.1 Termination: If the Client fails to submit the required data or fails to provide the required accuracy in the output file, the Contractor may terminate the Agreement subject to the terms of this Agreement and applicable law. The Client may also be liable for the applicable registration/maintenance amount referred to in Clause 3.1 and any lawful expenses properly arising from termination or legal proceedings.

4.2 No modification of the material terms of this Agreement shall be valid unless it is recorded in writing and accepted or signed by both parties where required.

4.3 Force Majeure: If the rendition of the form-filling services is hindered due to earthquake, flood, tempest, civil riots, act of God, infrastructure failure, political disturbance, strike, violence, or another comparable event beyond the reasonable control of the affected party, the affected obligations may be suspended until normal conditions are restored, subject to applicable law.

4.4 QC Failure and Termination: If the Client's Q.C. is failed and the Client wishes to terminate the Agreement after the first project, the applicable termination amount stated in the project terms is 4 × ₹4,500 = ₹18,000, subject to the Agreement and applicable law.

4.5 Security Deposit / Second Project: If the Client continues under the project conditions and becomes eligible for the second project, the stated security deposit is 6 × ₹4,500 = ₹27,000. For the second project, the Client must complete the assigned work within the given time and maintain at least 90% accuracy. Under the stated project conditions, the ₹27,000 security deposit is refundable with the salary after successful completion of the applicable second-project requirements.

5. Non-Solicitation

5.1 The Client understands and agrees that any attempt on the part of the Client to induce another client or contractor to leave the Contractor's engagement, or any effort by the Client to interfere with the Contractor's relationship with other clients and contractors, may be harmful and damaging to the Contractor, subject to applicable law.

5.2 The Client will not, directly or indirectly, knowingly interfere with an enforceable business or contractual relationship of the Contractor.

5.2.1 The Client will not induce or attempt to induce any client or contractor of the Contractor to quit employment or retention with the Contractor in breach of an enforceable obligation.

5.2.2 The Client will not misuse confidential information obtained through the Contractor to discuss or provide competitive employment or business opportunities in breach of an applicable confidentiality or non-solicitation obligation.

6. Confidential Information

6.1 The Client acknowledges that, in the course of the engagement, the Client may have access to confidential information which is exclusive to the Contractor or its customers.

6.2 The Client agrees and acknowledges that confidential information is proprietary and confidential in nature and shall not be disclosed to a third party except where authorized or legally required. Confidential information must not be used for purposes outside the assigned work.

7. Severability

7.1 The Contractor and the Client acknowledge that if any term, covenant or provision of this Agreement is held by a court of competent jurisdiction to be invalid, void or unenforceable, the remaining provisions shall continue to operate to the extent permitted by applicable law.

7.2 Variation: Except as otherwise expressly provided in this Agreement, this Agreement may not be materially changed or modified after acceptance except in writing signed or accepted by or on behalf of both parties where required.

8. Terms / Final Acceptance

8.1 The Client is assigned 250 forms and must complete the work within 3 days.

8.2 The required minimum accuracy is 90%, meaning at least 225 forms must be correct out of 250 forms.

8.3 The applicable work rate is ₹60 per accepted form, subject to successful completion, Quality Control and the other terms of this Agreement.

8.4 If the Client does not complete the work within the required 3 days, or does not meet the required 90% accuracy / 225-correct-form cutoff, salary eligibility and the ₹4,500 registration amount will be handled according to the terms stated in this Agreement.